To give you an idea of the cost, a Nissan Propane Forklift dating from the late 1990s will run you about $11,000 to $14,000. More than likely, you would be able to find a unit like this with less than 5,000 operating hours, around 15 feet of lifting capacity and cushion tires. However, a second-hand Nissan forklift truck that has less than 5,000 hours could be found for under $7,000. This alternative may be a little bit of an older model than some others, but remember; everything revolves around the operating hours. A unit like this will probably have a pretty good load capacity of roughly 5,000 pounds.
A brand new Nissan forklift, dating from 2005 to the current year, can be found for around $10,000. Typically, these units will have a standard lift capacity ranging from 4,000 to 5,000 pounds. Normally, a model similar to this will run smoothly and have cushion tires. Of course, newer units normally work smoother than older ones.
Kinds of Forklifts
Usually, forklifts are categorized in 2 specific ways: by the structure of the forklift and the type of fuel it takes. Based on structure, the following types of forklifts are among the most common:
Standard Forklift: Standard forklifts consist of the familiar warehouse forklift. These types of lift trucks offer a lifting capacity of 3,000 to 5,000 pounds. They have a height capacity of roughly 20 feet.
Reach Forklift: Often referred to as a narrow aisle forklift, the reach lift truck is the type of machine that is found within warehouses and distribution centers where space is at a premium. Narrow construction means that it could not carry as much as a typical forklift unit, however, it has an extendable mast which could easily lift loads approximately 40 feet.
Telescopic Forklift: Telescopic lift trucks are also referred to as telehandlers, extendable reach forklifts or a telescopic handler. These kinds lift truck trucks are a more heavy-duty and rugged version of a regular forklift. These models offer a telescopic boom which is capable of being extended out and raised up. Normally, these models are utilized on rough terrain. They can can handle loads up to 70 feet high
Straight Mast Forklift: Straight mast lift trucks are also normally used in rough terrain applications. These kinds of lift trucks are only capable of transporting loads vertically, unlike a telescopic model. These models could lift loads up to 12,000 lbs, while reaching a height of 10 to 30 feet.
|
|
