Most reach trucks and forklifts come with many common safety features, including seat belts on sit-down vehicles. Stand-up vehicles would almost always have dead-man petals. Furthermore, certain manufacturers are providing extra features such as speed controls which could reduce the overall speed based on load height and steering angle. For more information, there are numerous available articles about Lift Truck Safety and Loading Dock Safety.
Service and Support
Making certain you will maintain access to high levels of support and service is a really important part of lift truck selection. There seem to be a variety of new players within the forklift industry each year. Although they provide a nice price and a decent forklift design, if they do not offer the local or regional support and service infrastructure, you must be prepared for major stress when the lift truck breaks. Each lift truck model goes down at some point and service, parts and general questions should be answered at some point.
You will normally want to have a nearby dealer or repair shop with a full supply of the parts you need for your particular model. Be sure to visit the repair shop or the dealership and check their parts room so as to try to know how many parts they store. Make sure to inquire that if they do not have the part you require, where will it come from? Hopefully, the answer will be from a local or regional distribution facility.
Try to get some additional ideas on the units currently used within your area. This is doubly vital for specialty trucks such as turret trucks. If there are only a small amount of trucks in use in their service area that you should assume they may not be stocking many if any parts for them. Additionally, they may have very little overall experience in servicing that specific model too.
What is the Distinction between Pneumatic Tire and Cushion Tire?
Determining the distinction between cushion tire forklifts and pneumatic tire forklifts is one of the most popular questions regarding this type of equipment. Each and every type of tire is particularly suited for different needs.
Similar to vehicle tires, pneumatic tires have air inside of them. These tires are suitable for indoor application but they are more useful on gravel and uneven surfaces and in outdoor "yard" applications.
Cushion tires are designed as a solid industrial tire that is used mostly for indoor applications. These tires can be utilized outdoors on just asphalt surfaces. If you do drive cushion tires outside, there is an option to get traction tires on the front of the machine. These are called the drive tires. The steer tires or the back tires are specially made for steering. Traction tires located on the forklift's back would just wear out quicker. Therefore, if you do need to work outdoors, having traction on the front and the smooth tires on the back would be the most economical and safest way to operate.
What is the distinction between Solid Pneumatic and Air Pneumatic tires?
When trying to know the main distinction between the two kinds of tires, it could be somewhat tricky. They both work in the same outdoor conditions such as asphalt, and gravel. The main distinction between the two tire types is solid pneumatics are made of solid rubber. This means you cannot pop, gouge and puncture them because they are durable. These tires are more expensive than air pneumatic tires as they are made up of way more rubber. These types of tires are best suited for locations like for instance scrap yards and lumber yards where there can be plenty of debris or sharp objects on the ground.
The pneumatic tire can be punctured accidentally. You can get flat tires from them when this occurs. Before operating a forklift with air pneumatic tires, be sure that the yard is free of sharp metals, nails and scrap debris and by inspecting your work area. In the majority of applications, regular air pneumatic tires function really great. More
The S-boom telescopic booms by Genie have been equipped with an ability to work in heights of 14.20 meters to 40.15 meters and a reach ranging from 9.65 meters and 24.38 meters. Telescoping booms have a much greater range of reach horizontally as opposed to other kinds of aerial work platforms. Genie telescopic booms are designed with consideration to being able to access confined areas during industrial and construction jobs. They are also known for their ability to maneuver through a job site quickly and with great drive speed and traction. The platform hydraulically turns 160Ã?Â° and is able to stay level through the whole range. Front-entry platforms are available from 1.83 meters to 2.44 meters and come with 227 kilogram to 272 kilogram capacity for tools and operators. 360Ã?Â° continuous rotating turntables provide operators quick, easy positioning.
The Z-135/70 model comes equipped with a Jib-Extend, which is a telescoping jib. It extends from 3.66 meters to 6.1 meters. This model could also reach 110Ã?Â° vertically to give the user the ability to reach tasks that were unreachable by traditional jibs before. A secondary reverse-articulating boom on the Z-80/60 model gives the user 8.83 meters of up and over reach. This particular feature enables up and over reaching tasks to be completed with zero front arm swing.
The Fast Mast System made by Genie allows for time to be saved when both secondary and primary booms platform has to either be lifted or lowered without needing to lower the secondary boom. The Fast Mast system allows both booms to be raised fully simultaneously. Both of these features of the Genie Fast Mast system reduces the time needed for users to ascend and descend, increasing effectiveness and productivity. More
The Combi-CB is a combination side-loader and forklift which is safe, efficient, very manoeuvrable, and cost effective. This multi-directional, internal combustion engine powered, all-wheel drive lift truck is the first of its kind. The Combi-CB is a current material handling solution that can be a better, more effective choice for people who are still using regular counter-balance forklifts, reach trucks, side-loaders, and electric four-way forklifts. This particular type of machine may be ideal for any kind of business handling longer-length products or palletized products. The major benefits are in the multi-directional capabilities and compact size compared to a typical counterbalance lift.
The Combilift model has numerous benefits like: better productivity, increased operator ease of use, easier maintenance and lower product damage.
Combilift equipment are versatile machines, able to be used outdoors and indoors, on semi-rough terrain. This could help eliminate the need for having an outdoor and an indoor machine. It is offered in a LPG or diesel engine which are fuel efficient options that enable the lift to work equally well outdoors and indoors.
Combilift machines are remarkable at handling longer cargo that would typically require multiple equipment to handle the same cargo. It could transport goods through doorways that are smaller compared to the cargo being lifted. This feature provides greater operator safety and helps to decrease product damage without the need for both oversized doors or conveyors.
The Combilift system could offer great space savings due to its four-way steering technology and multi-directional capabilities which offers the ability to lift long loads while moving sideways.
Among the greatest advantages is that the Combilift could provide safer product handling to decrease the possibility of product damage or operator injury. Along with a low center of gravity, long cargo could be carried low, rather than lifted high, offering greater stability overall. Machines comply with ANSI/AMSE, B56.1 requirements and are tested to CE machinery directive.
Using industry-leading technologies, the Combilift could provide added value and efficiency to your business. More
Yale is a leading manufacturer of zero emissions electric forklifts in the North American Market. The company was among the first to start utilizing other control technology and the energy efficient AC motor. Yale's continued pursuit of enhanced energy efficiency is further improved by competitive testing. These testing results showcase that the 5000 pound electric rider model manufactured by Yale provides the best energy utilized per load transported, or energy efficiency, of any type of forklift within its class in North America.
Yale introduced and developed an innovative electronically controlled transmission. This machinery greatly reduces tire and brake wear for our ICE forklift clients. With regards to our electric forklifts, the company has implemented a system to recapture energy into the truck during braking and during the lowering of loads. This energy could then be reused. This specific process really lowers the unit's overall energy consumption.
Yale has been able to apply numerous inventive engineering techniques which have helped to minimize the vehicles non-productive energy. These methods have helped to enhance its drive train efficiency, hydraulic system efficiency and weight reduction. There are still patents pending on the drive train efficiency.
Yale has taken great strides to engineer their forklifts to be compatible with the latest in alternative power technologies over the years. Yale has implemented clean diesel fuels, LPG option and electric battery models. This tradition is being upheld most recently, with Yale being amongst the first in implementing working fuel cells in actual applications.
Yale has supported numerous greener technologies through engineering collaboration. Moreover, we have started a new system of field validation testing, and analysis. Presently, we are investigating in more effective battery chemistries and technologies, in order to lessen overall energy consumption, reduce toxic material content and increase efficiency.
Yale is strongly devoted to these green initiatives and they are reinforced by the company's participation in setting and developing new industry standards to implement these greener technologies in a safe and reliable manner.
Recyclability is one more key consideration in Yale lift truck design. Beginning at the design stage, the company actively selects materials for its lift trucks keeping the recyclability factor in mind. Having broken down items to be able to be sent for recycling and re-using materials as much as possible keeps environmental sustainability at the forefront of our business and greatly decreases our footprint. More
The corporation Pinguely-Haulotte was just named the Haulotte Group during the year 2005. The name change was the first time in 124 years the name has not included Pinguely. The Haulotte Group is popular for manufacturing articulated work platforms, telescopic work platforms, scissor lifts, trailer mounted work platforms and vertical mast-work platforms.
On the 24th of July, the year 2008 the Haulotte Group obtained Bil-Jax, who was the US' largest scaffold manufacturer. Currently, Haulotte Group has one factory in Spain, three plants in France, one in Romania, near the City of Pitesti. There is a new factory that opened during the winter of 2008. This factory is only 1 km away from the existing plant near Pitesti within Arges County. The plant is called Arges II. There are also two plants within the USA, the former Bill-Jax.
The company was established in 1881 within Lyon, France by Alexandre Pinguely. The company first constructed steam locomotives. The company evolved into making machinery eventually. During the year 1892, they supplied a steam engine to the Chemin de Fer de St Victor a Thizy.
The company supplied 7 trains to the Voiron-Saint-Beron railway. Pinguely was not considered a main steam engine manufacturer when it comes to numbers produced. The company supplied a steam train to the Chemin de Fer du Haut-Rhone during 1930 and by 1932, Pinguely started manufacturing steam shovels. Production of steam locomotives was stopped and the company began focusing instead on mobile cranes and making earthmoving equipment instead.
Arthur Hualotte established the beginnings of Haulotte during 1924, when it was referred to as Ateliers de Construction A. Haulotte. This company specialized in manufacturing derricks, aerial platforms and mobile cranes.
Manufacturing it was decided to be sub-contracted to Pinguely-Haulotte, who was to be responsible for the marketing and engineering, research, design and development. All products were abandoned by Saubot so that the company can focus on self-propelled aerial work platforms. More