Stock Number: 2-18-EH150751
Make: WORKHOG
Model: WG3-12-550
Year: 0


Stock Number: 301587
Make: Genie
Model: S125
Year: 2008


Stock Number: EQU003173
Make: Ottawa
Model: 30
Year: 2004


Stock Number: 301196
Make: Taylor
Model: THDC955
Year: 2002


Stock Number: EQU004971
Make: Taylor
Model: T330M
Year: 2003


Stock Number: 232743
Make: Tico
Model: ProSpotterDOT
Year: 2015


Stock Number: 232142
Make: WackerNeuson
Model: WK HI400HD D
Year: 2013


Stock Number: 209041
Make: CAT
Model: 2ETC3500-48V
Year: 2015


Stock Number: 2-16-600275
Make: Liebherr
Model: 132HC
Year: 1981


Stock Number: EQU004892
Make: Mitsubishi
Model: FG45N
Year: 2015


Stock Number: 268559
Make: CAT
Model: DP70 CAB
Year: 0


Stock Number: EQU005902
Make: Toyota
Model: 7BNCU20
Year: 2013


 
Hyundai IC Forklifts

Hyundai IC Forklifts

Inspect a Forklift
Based on OSHA and HRSDC statistics, there are approximately 10,000 forklift-related worklplace injuries every year in North America. Some injuries are caused by the lack of correct equipment inspection and maintenance of the machine. Other injuries are caused by operator error.

Injuries are not the only issues which are related to the operation and maintenance of lift trucks. One more serious problem is damage to property. Lift truck accidents could cause damage to sprinklers, overhead pipes, and other machinery and building walls. By completing thorough inspections each day, you could help lessen forklift injuries.

You must first turn off the engine before inspecting the forklift. Check the levels of the fuel, engine oil, coolant, brake fluid and hydraulic oil. Visually inspect the machine's tires looking for indications of wear, correct air pressure and general condition. Visually check the forks on the front of the machinery too. Verify the condition of the heel and top-clip retaining pin. Check that the backrest is securely attached. Make certain that the overhead and finger guards are attached. Visually inspect the stops and cables, the hydraulic hoses and the mast chains as well.

On LP or liquid propane forklifts, check the propane tank. Check for any indications of corrosion, damage or rust. Be certain that the battery has enough levels of electrolyte and which is sufficiently charged. Visually check all belts. Check to confirm the location of the owner's manual and make certain it is located in the designated on-board storage compartment. Confirm the hood latch and confirm that it is functioning as it is supposed to. Inspect the seatbelt and make sure it latches securely and is functioning properly.

After doing the above steps, turn on the engine. Listen carefully to the engine. Investigate any unusual sounds immediately. Make sure that both the service brake and the parking brake are correctly working. Make certain that the accelerator and the steering controls are operating at optimum performance levels.

  • Nissan Pneumatic Tire Forklift
    What is the Distinction between Pneumatic Tire and Cushion Tire? Determining the distinction between cushion tire forklifts and ... More
  • Genie Straight Boom Lifts
    The S-boom telescopic booms by Genie have been equipped with an ability to work in heights of 14.20 meters to 40.15 meters and a reach ... More
  • Combi Lift Multi Directional Forklifts
    The Combi-CB is a combination side-loader and forklift which is safe, efficient, very manoeuvrable, and cost effective. This ... More
  • Yale Narrow Aisle Forklifts
    Yale is a leading manufacturer of zero emissions electric forklifts in the North American Market. The company was among the first to ... More
  • Haulotte Aerial Work Platforms
    The corporation Pinguely-Haulotte was just named the Haulotte Group during the year 2005. The name change was the first time in 124 ... More