Stock Number: EQC006149
Make: Exide
Model: WG3-24-550
Year: 0


Stock Number: 2-18-UEF73
Make: Misc
Model: FORKS
Year: 0


Stock Number: 205670
Make: CAT
Model: P5000-LE
Year: 2010


Stock Number: 2-16-230208
Make: Potain
Model: IGO50
Year: 2007


Stock Number: EQC012662
Make: Genie
Model: GS4069RT
Year: 2014


Stock Number: 205692
Make: Manitou
Model: M50.4
Year: 2011


Stock Number: 232206
Make: WackerNeuson
Model: WK HI400HD D
Year: 2013


Stock Number: EQC012543
Make: Genie
Model: GS2632
Year: 2010


Stock Number: 300618
Make: Tico
Model: ProSpotter
Year: 2016


Stock Number: EQC009531
Make: Hyundai
Model: 25L-7M
Year: 2013


Stock Number: 231768
Make: Magnum
Model: MLT4060
Year: 2013


Stock Number: EQU006023
Make: Clark
Model: C500Hy805
Year: 1984


 
Caterpillar Pneumatic Tire Forklifts

Caterpillar Pneumatic Tire Forklifts

Utilize a Pneumatic Forklift
You could often find pneumatic forklifts in shipping and warehouse operations. Also referred to as pump trucks or pallet trucks, they are used to move supplies and things around on wooden pallets using metal forks which are mounted on a wheeled counterweight. The counterweight has a pump which raises the forks off the ground. A pallet truck is intended to be operated by one person.

To prevent loosing control while lifting heavy loads, pallet trucks should always be operated with care. Equipment must be inspected before operating. Clear the wheels area of any obstacle. Make certain that the handle smoothly turns. The pallet must be stacked carefully in order to guarantee that nothing will fall off during transportation.

On the end of the pallet truck's handle, squeeze the level found on the inside of the metal loop to lower the forks and release the air in the pump. The forks could then be pushed into the slots of the pallet. The forks must be at the center to guarantee equal distribution of the pallet's weight across them. Lift the forks from the ground by pumping the handle of the pneumatic lift until the pallet has completely cleared the ground. Do not raise the pallet very high or the forklift could unbalance.

Pull on the handle and then drag it behind you if you want to move the pallet. It is really not safe to push the pallet ahead of you because the thrust can cause it to lose control. Take turns slowly and don't try to stop abruptly. Stop gradually, squeeze the lever, and the forks will lower to the ground. Finally, remove the forks from the pallet by pulling them out. Return the pallet truck to its permanent place.

  • Nissan Pneumatic Tire Forklift
    What is the Distinction between Pneumatic Tire and Cushion Tire? Determining the distinction between cushion tire forklifts and ... More
  • Genie Straight Boom Lifts
    The S-boom telescopic booms by Genie have been equipped with an ability to work in heights of 14.20 meters to 40.15 meters and a reach ... More
  • Combi Lift Multi Directional Forklifts
    The Combi-CB is a combination side-loader and forklift which is safe, efficient, very manoeuvrable, and cost effective. This ... More
  • Yale Narrow Aisle Forklifts
    Yale is a leading manufacturer of zero emissions electric forklifts in the North American Market. The company was among the first to ... More
  • Haulotte Aerial Work Platforms
    The corporation Pinguely-Haulotte was just named the Haulotte Group during the year 2005. The name change was the first time in 124 ... More