Stock Number: EQC012656
Make: JLG
Model: E450A
Year: 2008


Stock Number: 300998
Make: Hyundai
Model: 25BC-7
Year: 2008


Stock Number: 232136
Make: WackerNeuson
Model: WK HI400HD D
Year: 2013


Stock Number: 208188
Make: CAT
Model: GP30N5
Year: 2015


Stock Number: 2-18-UEF12
Make: Misc
Model: FORKS
Year: 0


Stock Number: 211932
Make: JLG
Model: 660SJ
Year: 2013


Stock Number: EQU005190
Make: Genie
Model: GTH1056
Year: 2011


Stock Number: 2-18-UEF98
Make: Misc
Model: FORKS
Year: 0


Stock Number: 265664
Make: Ottawa
Model: C150
Year: 2003


Stock Number: EQU001454
Make: Mitsubishi
Model: FGC20N
Year: 2009


Stock Number: 02-18-UET13
Make: Misc
Model: TIRES
Year: 0


Stock Number: EQC003405
Make: Tico
Model: ProSpotter
Year: 2017


 
Haulotte Straight Boom Lifts

Haulotte Straight Boom Lifts

Telehandlers are machinery which are designed to work in rough environment, although, that doesn't mean that they could be driven without any regard for the terrain. These kinds of machinery have a a lot greater risk of tipping over or load loss when they are traveling on slopes.

If you do need to travel on a slope, ensure that you proceed carefully and slowly while keeping the load low. Prior to getting on the slope, downshift to 4WD and a lower gear. Using the engine brake would really help to control the telehandler's speed. Try to avoid turning on a slope if possible. If you must make the turn, take it as wide as possible and use extreme caution.

Always try to avoid driving across excessively steep slopes. Use the heavy end of the telehandler pointing up the incline, when ascending and descending slopes. Even when there is no cargo on the forks, the equipment's counterweighted rear is fairly heavy; thus, it could be necessary to drive backwards up slopes. When the telehandler is carrying a load, the front of the unit becomes the heavy end, and you can back the machine down the slopes.

Operator training is extremely essential on a mixed jobsite. Rear pivot machines would often operate on the same jobsite of coordinated steering machinery, where everyone is allowed to use all of the machines. In this instance, an individual who is used to using a coordinated steer machinery can jump onto a rear-pivot machine. A really significant difference between how these two units operate depends on which part of the equipment extends outside of the turning radius.

  • Nissan Pneumatic Tire Forklift
    What is the Distinction between Pneumatic Tire and Cushion Tire? Determining the distinction between cushion tire forklifts and ... More
  • Genie Straight Boom Lifts
    The S-boom telescopic booms by Genie have been equipped with an ability to work in heights of 14.20 meters to 40.15 meters and a reach ... More
  • Combi Lift Multi Directional Forklifts
    The Combi-CB is a combination side-loader and forklift which is safe, efficient, very manoeuvrable, and cost effective. This ... More
  • Yale Narrow Aisle Forklifts
    Yale is a leading manufacturer of zero emissions electric forklifts in the North American Market. The company was among the first to ... More
  • Haulotte Aerial Work Platforms
    The corporation Pinguely-Haulotte was just named the Haulotte Group during the year 2005. The name change was the first time in 124 ... More