Stock Number: 206419
Make: Jungheinrich
Model: ETR345-36V
Year: 2012

Stock Number: 231276
Make: Miller
Model: Big Blue 400D
Year: 2012

Stock Number: 212452
Make: JLG
Model: 800AJ
Year: 2014

Stock Number: 232180
Make: WackerNeuson
Model: WK HI400HD D
Year: 2013

Stock Number: 1-16-600209
Make: Terex-Comedil
Model: CTT182-8 TS21
Year: 2016

Stock Number: 205981
Make: Manitou
Model: M50.4
Year: 2012

Stock Number: 2-18-UEATT-65
Make: Misc

Stock Number: EQU007476
Make: Tico
Model: ProSpotterDOT
Year: 2012

Stock Number: EQU007692
Make: Ottawa
Model: 30
Year: 2000

Stock Number: 208104
Make: Hyundai
Model: 70L-7A
Year: 2014

Stock Number: 205639
Make: Hyundai
Model: 110D-7A
Year: 2010

Stock Number: EQC012283
Make: Genie
Model: S40
Year: 2007

Doosan IC Forklifts

Doosan IC Forklifts

How to Properly Use a Forklift
Lift trucks are material handling machines which can transport cargo. Normally, these machines are used in some industries to move heavy supplies in various settings like supply companies, warehouses and airports. Anyone operating a lift truck has to be trained to utilize the machinery cautiously. It is essential to be fully aware of one's surroundings when operating a forklift. Forklifts are designed to run on propane, gasoline, batteries or diesel. Typical forklifts are popular in a wide array of commercial applications and are not hard to use with correct training. The following steps outline the basics of utilizing a lift truck:

1 Get familiar with all the levers that are utilized to transport and maneuver the load from place to another location. The levers can be found to the right side of the steering wheel.
2 The first lever controls the up and down movement of the forks. Pulling the lever towards your body moves the tines up, and pushing the lever away from your body moves them down. Blades must be kept near the ground except when loading or unloading.
3 The other two levers control the tilt as well as the left/right movement of the forks. The blades are designed to tilt between 15 and 30 degrees. It is better that you practice prior to picking up a load. Utilizing the second lever, push it away from you to tilt the tines forward, and pull it towards you to tilt the forks back.
4 Lever number 4 is utilized to control the forks side to side movement from left to right. Just move the lever in the direction of where you would like the tines to move: left in order to move the forks left, and right to move the forks right.
5 Carefully approach the cargo. Lower the tines and carefully drive forward until the forks slide under the load. After that lift the tines a few centimeters by pulling the lever towards you. If the cargo is top-heavy, you should tilt the tines backwards a small amount for balance.
6 Alert other people and employees when the lift truck is approaching by honking and take safety precautions by slowly taking corners and honking. Approach the area where you would be working carefully. Control the levers to maneuver the load to where it is going. When the cargo is placed, reverse gears and cautiously back away.
7 A lift truck stops the same way as an automobile. The brake is found to the accelerator's left side. Once stopped, put the gear into "park."

  • Nissan Pneumatic Tire Forklift
    What is the Distinction between Pneumatic Tire and Cushion Tire? Determining the distinction between cushion tire forklifts and ... More
  • Genie Straight Boom Lifts
    The S-boom telescopic booms by Genie have been equipped with an ability to work in heights of 14.20 meters to 40.15 meters and a reach ... More
  • Combi Lift Multi Directional Forklifts
    The Combi-CB is a combination side-loader and forklift which is safe, efficient, very manoeuvrable, and cost effective. This ... More
  • Yale Narrow Aisle Forklifts
    Yale is a leading manufacturer of zero emissions electric forklifts in the North American Market. The company was among the first to ... More
  • Haulotte Aerial Work Platforms
    The corporation Pinguely-Haulotte was just named the Haulotte Group during the year 2005. The name change was the first time in 124 ... More