Stock Number: 2-18-UEF29
Make: Misc
Model: FORKS
Year: 0


Stock Number: 1-16-232264
Make: Spyder
Model: URW376
Year: 2014


Stock Number: 211584
Make: JLG
Model: 450AJ
Year: 2012


Stock Number: 301418
Make: Capacity
Model: TJ7000
Year: 2007


Stock Number: 231858
Make: Magnum
Model: MMG35
Year: 2013


Stock Number: EQU005902
Make: Toyota
Model: 7BNCU20
Year: 2013


Stock Number: 212153
Make: JLG
Model: 800AJ
Year: 2013


Stock Number: EQU005545
Make: Hyundai
Model: 160D-7E
Year: 2012


Stock Number: 301144
Make: CAT
Model: DP80
Year: 1994


Stock Number: 2-18-UEATT-76
Make: Misc
Model: CARRIAGE
Year: 0


Stock Number: 2-18-UEF32
Make: Misc
Model: FORKS
Year: 0


Stock Number: EQU003516
Make: Tico
Model: ProSpotter
Year: 2011


 
Wolff Self Erect Cranes

Wolff Self Erect Cranes

Jib Crane Models
Jib cranes are made up of a trolley hoist on a horizontal load-bearing boom. This boom is attached to a pivoting vertical member and up to 20 feet long. Jib cranes can transport loads between any areas within the boom's arc of rotation. Light duty models are used in warehouses and factories for loads weighing as much as 5 tons. The web site BestJibCranes.com showcases the major kinds of jib cranes as being either mast mounted, free-standing or wall-mounted.

Free Standing
Free-standing jib cranes can stand alone not requiring support from the building structure. The horizontal boom in this situation is attached to a pivoting vertical column that is solidly anchored to the building floor. This kind of jib crane needs a foundation made of either concrete or steel and can rotate a full 360 degrees.

Mast-Type
The vertical column on the mast-type jib cranes are supported by pivot points at the top and the bottom. These pivots are connected to the building floor and the overhead steel structure. These jib-cranes offer 360 degrees of rotation with the benefit of not requiring the massive foundation required for free-standing units.

Wall Mounted
The wall-mounted jib cranes provide a horizontal boom that is attached to the building wall as opposed to the regular vertical column. These machinery are ideal in places where the full 360 degree rotation is not required and provide up to 200 degrees of rotation.

Depending on how the boom is supported, there are two model varieties. One type uses a tie rod from above the boom that is attached to the wall. The other variety supports the boom from below by using a cantilever brace that is also attached to the wall.

  • Nissan Pneumatic Tire Forklift
    What is the Distinction between Pneumatic Tire and Cushion Tire? Determining the distinction between cushion tire forklifts and ... More
  • Genie Straight Boom Lifts
    The S-boom telescopic booms by Genie have been equipped with an ability to work in heights of 14.20 meters to 40.15 meters and a reach ... More
  • Combi Lift Multi Directional Forklifts
    The Combi-CB is a combination side-loader and forklift which is safe, efficient, very manoeuvrable, and cost effective. This ... More
  • Yale Narrow Aisle Forklifts
    Yale is a leading manufacturer of zero emissions electric forklifts in the North American Market. The company was among the first to ... More
  • Haulotte Aerial Work Platforms
    The corporation Pinguely-Haulotte was just named the Haulotte Group during the year 2005. The name change was the first time in 124 ... More