Stock Number: EQU005635
Make: Hyster
Model: S50FT
Year: 2013

Stock Number: 208604
Make: Hyundai
Model: 25LC-7M
Year: 2015

Stock Number: 301580
Make: Tico
Model: ProSpotter
Year: 2016

Stock Number: 232155
Make: WackerNeuson
Model: WK HI400HD D
Year: 2013

Stock Number: 301430
Make: Capacity
Model: TJ7000
Year: 2007

Stock Number: 301327
Make: Hyster
Model: H700F
Year: 2003

Manitou Forklifts Georgia

Manitou Forklifts Georgia

Regular inspections could really help to lessen forklift repairs and save you numerous amounts of money eventually. The standing joke in the industry is a lift truck technician coining the saying "Pay me now, or pay me later," since it generally costs more to procrastinate when it comes to forklifts. Like for example, the minor fixes that go unrepaired can later turn into costly repairs.

Tilt Cylinders
Oil leaks are a very serious concern if they are not checked. Inspect for damage or oil leaks regularly. Oil leakage can cause uncontrolled mast movement and this could be extremely dangerous. Whether the leaks are in the cylinder or outside, the outcome could lead to loss of vital fluid and cylinder drift. When leaks or damage are detected, you normally would have to replace the complete cylinder assembly or the seals.

Be sure to pay attention because you don't want mast lift chains to stretch beyond acceptable limits. Look carefully for any indications of damage or wear and tear. Check frequently with a chain wear gauge in order to monitor the wear. If the chain is worn beyond 2 percent or rusted, it is time to replace the chain. Following these tips will help keep your equipment functioning optimally.

The mast needs to be smoothly moving up and down when operating the lift control lever. Be sure to check to see if the mast is tilting backwards and forwards in a smooth way. You may have to lubricate the mast strip sliding surfaces if the sliding surfaces are binding. Also lubricate their fittings, since there is a fitting located on either side of the inner mast. The lift bracket side rollers are another lubrication spot.

The forks need to be inspected for damage, wear and cracks since cracked or worn forks could fail with out any warnings. Any damaged fork of course means taking the truck out of service immediately. If the cracks are deeper than just on the surface, they should be replaced as they really can't be safely fixed.

  • Yale Forklifts Georgia
    Overview Decide which forklift is best for you and your company by taking the time to do your homework. This could really save you or ... More
  • Komatsu Forklifts Georgia
    Fleet managers can plan for the unplanned, ramp up on overall productivity and safety measures and lessen expenses with several simple ... More
  • Mitsubishi Forklifts Georgia
    Lifts are work platforms which are used to raise and lower individuals, materials and equipment for loading and work positioning. These ... More
  • Hyster Forklifts Georgia
    The responsive and comprehensive "after-sale" support offered by Hyster is the most meticulous in the material handling business. ... More
  • Kalmar Forklifts Georgia
    Cargotec's Kalmar container handling solutions and ship-to-shore solutions are utilized in terminals and ports all around the world. ... More
  • Caterpillar Forklifts Georgia
    It is a lot more complex to drive a lift truck than to drive a vehicle. The forklift driver needs to receive special training and have ... More
  • Nissan Forklifts Georgia
    With the advancement of technology over the past century, lift trucks have become extremely popular. The need for supplies to be ... More
  • Taylor Forklifts Georgia
    The lift truck or forklift is a powered machine used most often for the transporting and lifting of products and materials within ... More

Manitou Forklifts Georgia

Short Story: